Details
Panasonic Network Camera Recorder with Viewer Software
BB-HNP17 Features
- H.264, MPEG-iv and Motion JPEG Recording & Monitoring
- Supports resolutions of 1280 x960
- Flexible Layout
Full Screen Display
Single Monitoring Screen Display
Multi-Monitoring window
Car Scan Display under Multi-Monitoring - Remote Access Function
- Fourth dimension Specified Colour Dark View
- Multi-Sensor-Activated Recording
Motion Detection Recording
Sound Detection Recording
Shock Detection Recording
Alarm Recording - Pop-up brandish with Sensor Detection
- Timer Recording
- Timer Recording with Preset Position
- Converting Recorded Images to PG/WAV/ASF/AVI formats
- Audio Transmission
- Snap Shot
BB-HNP17 Description
Network camera recorder
HNP17 allows full monitoring and recording of your IP cameras. Allowing up to 64 cameras to be registered it is platonic for small-medium IP applications. The flexible layout allows total and multi screen options and switching between cameras.
HNP17 gives you truthful control of your security system with multi sensor activated recording or timer recording with preset positions. Recording tin be activated by alarms from the camera such as move, noise or shock detectors, triggering specific presets and recording.
H.264, MPEG-4 and Motion JPEG recording & monitoring
Even if a user of this system uses his/her PC at any place afar from a site to be recorded,
this organization enables the user to tape and replay, on his/her PC, whatever paradigm with sound which can exist taken through its network camera connected with LAN or the Internet.
Under this system, the user tin can tape whatsoever epitome as well as sound with it, and so the user can feel equally if he/she was on the spot, even though he/she is really away from the site. Also, this system enables the user to record several pieces of images through its network cameras at the aforementioned time.
Corresponding to the existing user-friendly functions of MPEG-4 and Motion JPEG, this organisation has also newly corresponded to the H.264 function which is responsible for high-pinch and smooth moving paradigm. So, users of this system can select a proper recording style amidst multiple choices co-ordinate to recording uses and environments.
Supports resolutions of 1280 x 960
This system enables a user to record and monitor, innovatively conspicuously in such high resolution every bit 1280 ten 960 pixels, any paradigm taken through its camera.
If you demand to take a clear and detailed image for your convenient use past this system, y'all tin save in your PC your recorded data as loftier epitome quality as it is for your convenience.
Flexible Layout
This system enables a user to brandish images from up to sixteen network cameras on 1 screen for simultaneous monitoring (Multi-Monitoring).
In case that the number of network cameras registered in [BB-HNP17] exceeds 16 units, this organization tin can show images from upwardly to 64 network cameras on 128 pages of screens and switch these screens flexibly co-ordinate to the user's need. Under this system, for example, a user can switch images from its cameras into a Whole Paradigm Screen or switch into a unmarried screen display (Single Monitoring Screen Display) past double-clicking a paradigm the user want to cheque closely, etc.
Full screen brandish
A camera image is displayed on the full screen of your PC.
Single Monitoring Screen Brandish
If you double-click an image from the network camera, the screen brandish on your PC is switched into Single Monitoring / Multi-Monitoring screen for the user's convenience.
Flexibility of Layout Setup
Under this function, you tin can set up up the layout of multi prototype screen display.
For example, you can enlarge an prototype y'all desire to cheque closely, you can change the number of images vertically and horizontally for your convenience, etc
Auto Scan Display under Multi-Monitoring
This function shows different multi-monitoring images at certain intervals and can switch into different pages of those images.
Multi-Sensor-Activated Recording / Presettable-Timer Recording
Under this function, different types of sensors (Movement Detector, Stupor Detector, Audio Detector, External Sensor Detection) are designed to start recording. Also this system has its timer recording function which starts and ends the recording at user's specified time. Besides, in case of Timer Recording, the direction of the monitoring lens is designed to set at the specified target when the recording starts (?3). Whatever combination of recording functions is available. For example, Sensor Detection Function combined with Timer Recording Function is possible. Recording to be started past Movement Detector within the specified time frame and Warning Recording are also possible.
As well, Recording Time earlier and later the sensor detection tin can be specified for setting.
Timer Recording Function is designed to set 10 times of recording per camera. This enables a user to change recording-first /-end times between weekdays and weekend for his/her convenience
Pop-up display
This organization is designed to enlarge the image (stationary paradigm) at the time of the sensor detection by popping it out on the screen for notifying purpose.
Remote Access Office
If a user gets [BB-HNP17] installed on his/her PC, the user can access and/or check any epitome taken past the network camera on the web browser of his/her PC through the Network.
In this utilize, [BB-HNP17] doesn't need to exist installed on the PC on the customer's side.
Users making admission to the image can constitute three stages of admission rights.
The ambassador has the right to create new apply environmental settings by, for instance, calculation new recording conditions, etc.
Cautions:
Before y'all install the remote client of [BB-HNP17], please be sure to purchase the post-obit license fro utilise.
For U.s.:BB-HCA5A and BB-HCA8A
For Other Regions:BB-HCA5CE and BB-HCA8CE
Fourth dimension Specified Colour Night View
This function is for setting the timer to plow ON/OFF the coloured night view function.
This role automatically turns on Normal Mode in daytime and turns on coloured Dark View Mode in the night or a dark situation, and then this function enables recording/monitoring images taken past the Network camera(s) in a proper way according the recording state of affairs.
This role likewise memorizes the shutter speed of the normal mode and so recovers the shutter speed of Coloured Night View Manner into the one of Normal Mode when switching from Coloured Dark View Mode into Normal Mode.
BB-HNP17CE Specifications
| Camera registration monitoring |
No. of registerable
camera units | Up to 64 photographic camera units.
Note that the actual number of registerable camera units varies depending on the performance of the PC used. |
| Camera image view | Sequential display, Up to xvi multi-camera brandish, full screen display, layout change |
| Image brandish size | Automatically adjusted to friction match the camera layout. |
| Camera setup*ane | Each photographic camera can be prepare individually
(camera name, resolution, epitome quality setting, recording format, timer setting, etc.) |
Selected camera
image brandish | Automatically adjusted to match the camera layout. |
| Image zoom in/out | None (Automatically adjusted to match the camera layout.) |
| Camera control*one | Command of basic camera functions (pan/tilt/zoom, brightness, resolution, prototype quality, audio level). |
| Preset | Preset functions set in cameras tin be used |
| Preset Sequence*1 | Periodically scans and displays the locations registered in the camera presets. only for cameras with preset sequence feature) |
| Time specified colour nighttime view*one | Colour night view activation/deactivation can be registered in a schedule. |
| Recording |
Recording file
format | Original file format: Images and voices are recorded continuously in a moving image file. |
| Recording media | Hard deejay, network dirive*two |
| Recording resolution*1 | H.264 : 1280 ten 960 / 640 10 480 / 320 x 240
MPEG-4 : 1280 x 960 / 640 x 480 / 320 x x240 / 192 x 144
MotionJPEG : 1280 x 1024 / 1280 x 960 / 640 10 480 / 320 ten 240 / 192 ten 144 / 160 x 120 |
Paradigm quality
(JPEG merely) | Favour clarity, standard, favour motions |
| Recording interval | Not specified (based on camera's paradigm update interval), specified: 5 images/2nd to 1 image/hour Recording interval designation and audio recording can be done simultaneously. |
No. of camera units for
simultaneous recording | Dependent on camera blazon and operation of PC. See the hardware specifications beneath. |
Recording capacity
limit part | Maximum recording capacity value can exist prepare for individual camera units (whether to relieve new data by overwriting or to stop recording when the set capacity is reached can be selected). In addition to a chapters limit for each camera, there is also a chapters limit for the unabridged storage media. |
Movement detection
recording
(JPEG only) | The unit can be set to actuate recording when motion is detected (sensitivity and threshold value tin be adapted) or to record for a certain time length before and subsequently motion detection.*3 Motion detection can be disabled in specified areas. Motion detection can be confirmed on-screen. |
Shock detection recording*1
(JPEG only) | Starts recording with daze detection recording when the photographic camera detects a daze.
The recording time for shock detection recording (and then on) is set using this software. |
Sound detection recording*1
(JPEG only) | The unit can be set to activate recording when sound is detected (loudness and threshold value tin be adjusted) or to record for a certain time length before and later on motion detection.
Sound detection tin can be confirmed on-screen. |
| Timer recording | Programming of kickoff and terminate schedules based on day of week and fourth dimension. Central word can also be fix for recording.
(ten schedules can be registered per photographic camera). |
| Timer recording with preset designation | Specifying the display location of timer showtime/end times |
Alert recording
(JPEG only) | Recording is triggered by the reaction of a sensor mounted to the camera. A certain time length before and afterward the sensor reaction tin can likewise exist recorded. |
Disk capacity limit
office | Monitors the free infinite on the specified recording deejay, and stops recording when the gratis infinite becomes smaller than the fix value. |
| Prototype operation |
| Continuous play dorsum | Playback of images with voices, playback of image files. Playback speed can be varied. Playback in reverse is possible. Simultaneous playback of images from multiple cameras is also possible. |
| Recorded image view | A listing of recorded paradigm files, or a graphical list tin also be displayed. |
| Performance of recorded images | Recorded images tin can be copied or deleted. |
| Format conversion | All or part of the recorded images can be converted to MPEG-i, MPEG-four, or JPEG format files, or but the audio portion can be converted to WAV files. |
| Image search |
Recorded image
search function | Search recorded images in ane-day units using the recording fourth dimension, or using a central give-and-take set earlier recording.
Searching can also be washed for particular, desired folders. |
*1 Depends on Camera's Spec.
*2-1 Folders on the network allotted to the drive tin exist specified for saving data.
*2-2 When a network bulldoze is specified equally a folder for saving information, the amount of data flowing over the network increases. This may remarkably degrade the operating operation for watching or recording photographic camera images, watching previously recorded images, etc., and may also consequence in errors. Information technology is recommended that a folder on a local disk be specified for saving data.
*3 The detection level varies depending on the photographic camera resolution, paradigm quality setting, subject conditions, network conditions, etc.
System Requirements for your PC
| Bone | Microsoft® Windows Vista®
Microsoft® Windows® XP
Microsoft® Windows Server® 2003
Microsoft Windows vii(32bit)
Microsoft® Windows Server® 2008 |
| Web browser | Cyberspace Explorer® 6/7/8(32bit) |
| Resolution | SXGA (1280 × 1024 pixels; 16,770,000 colours) |
| File organization | NETS (NT File System) |
| Sound*ane | Sound output feature (Speaker or Headphones)
Audio input feature (Microphone) |
| Hardware specifications |
Recording
condition | · When ten network photographic camera units are continued CPU: Intel® Pentium® 4 3GHz or greater, or equivalent compatible processor, RAM: 1024 MB or more than*
· When two network camera units are connected CPU: Intel® Pentium® 4 two.6GHz or greater, or equivalent uniform processor, RAM: 512 MB or more than* |
| Voice | Audio output function (including speaker or headphone) |
*1 When using a camera that supports sound
*This specification is required for using all network cameras to simultaneously record at a resolution of 320 ten 240 in standard image quality, while monitoring with all registered cameras at a frame rate of 2 fps.
BB-HNP17 The recommended PC specification for number of recording camera.
| Recommended PC specification *1 |
| CPU | Core2 Quad CPU Q 9400 | Intel Cadre 2Duo |
| Clock | 2.66GHz | two.ane GHz |
| Memory | i.96GB | i GB |
| Os | Windows XP | Windows XP or later |
| Status |
| Compression | H.264 | JPEG | MPEG-iv | H.264 |
| Monitoring frame rate | Not specify *2 | 10fps | Not specify *2 | 10fps | 10fps |
| Resolution: | VGA | VGA | VGA | VEGA | VGA |
| Monitoring layout | 4x4 | 4x4 | 2x2 | 3x3 | 4x4 | 2x2 |
| The Number of connecting cameras | 20 | 10 | 4 | 8 | xi | ii |
*1: In example of using lower performance PC than this table, PC resource is well-nigh occupied by BB-HNP17.
It cause that unexpected PC performance response degradation may occur.
It is not recommended to install nor operate the other application during operating this software.
*2: In case of defining "Monitoring frame charge per unit" to be "Non specify", PC resources is consumed much more than "10 fps".
Information technology cause that the number of recordable camera will exist reduced.
BB-HNP17 display image with same frame rate from camera. (Ex. If photographic camera output 30fps brandish around 30fps.)
Still and move prototype information size
JPEG Data size for 1 epitome frame (image simply), Data format: JPEG
| resolution (dot) | size(KB):
favour clarity | size(KB):
standard | size(KB):
favour move |
| 1280 ten 960 | approx.120 | approx.77 | approx.60 |
| 640 x 480 | approx.l | approx.35 | approx.27 |
| 320 ten 240 | approx.25 | approx.16 | approx.ten |
| 194 x 144 | approx.ten | approx.7 | approx.5 |
The approximate recording capacity is calculated by using the following formula:
Size (KB) x Frame rate (images/sec) x Recording time (sec)
Example
- The calculation for a one-60 minutes recording of 640 x 480 resolution images at a frame rate of 5 images/sec in Favour Clarity mode is as follows:
l KB ten five images/sec x 3,600 sec (1 hr) = 900,000 KB ≒ 879 MB - In case of images with voices, 4 KB is added per each second:
900,000 KB + 4 KB x 3,600 sec = 914,400 KB ≒ 893 MB
MPEG-4 Data size for ane second of motion images (images only), Data format: MPEG-4
| resolution (dot) | MPEG-4 bit charge per unit* |
| 640 x 480 | 768kbps |
| 320 x 240 | 384kbps |
| 194 10 144 | 128kbps |
* MPEG-4 fleck rate: This depends on the value fix at the camera for MPEG-four bit charge per unit for image distribution.
The approximate recording capacity is calculated past using the following formula:
MPEG-4 bit rate (Kbps)/eight bits 10 time (sec).
Instance
- The calculation for 640 x 480 resolution images at an MPEG-4 chip rate of 768 Kbps is every bit follows:
768 Kbps/viii bits 10 3,600 seconds (1 hour) = 345,600 KB ≒ 337.5 MB - In case of images with voices, 4 KB is added per each second:
345,600 KB + 4 KB x 3,600 sec = 360,000 KB ≒ 352MB
H.264 Data size for 1 2d of motion images (images only), Data format: H.264
| resolution (dot) | MPEG-4 bit rate* |
| 1280 x 960 | 2048kbps |
| 640 x 480 | 1536kbps |
| 320 x 240 | 1024kbps |
* H.264 bit rate: This depends on the value prepare at the photographic camera for H.264 chip rate for image distribution.
The approximate recording capacity is calculated by using the following formula:
H.264 bit charge per unit (Kbps)/eight bits 10 time (sec).
Example
- The calculation for 640 x 480 resolution images at an H.264 bit rate of 1536 Kbps is as follows:
1536 Kbps/8 bits ten 3,600 seconds (1 hour) = 691,200 KB = 675 MB - In case of images with voices, four KB is added per each second:
691,200 KB + four KB x 3,600 sec = 705,600 KB ≒ 689MB
BB-HNP17 Downloads
BB-HNP17 Brochure